|
Links to 8 other static webcams below.....
If you have already connected to the
webcams previously select one of these:-
|
|
View WebCam at 800 x 600
|
|
|
View WebCam at 1024 x 768
|
First timers please follow this procedure:-
It's a little complicated to connect to the webcams ...you may want to print out this page
|
There are currently
8
people
viewing the webcams.
Please note: If there are more than 3 people viewing the webcams at the same time they are swamping the available bandwidth, thereby degrading the service for all users. There's nothing I can do to fix this...if the control panel is sluggish and loads very slowly you're probably best coming back and viewing at another time
|
|
You'll probably need broadband to view these
- there's a LOT of bandwidth to cope with. Even with broadband if there are a few folk watching at the same time it can be very slow to load and update. You'll also need to be viewing in at least 800 x 600 resolution - if you're down to 640 then you won't be able to access the control panel settings for different camera views.
Before you can view the webcam you need to allow the ActiveX control to be downloaded
1) Disable any popup blockers you got running. This includes any in Norton Antivirus or Norton Security. You may also need to temporarily disable any firewalls you got running.
2) In your browser window go to Tools - Internet Options - Security and click on Custom Level
3) Scroll down the menu and about half way down select "ENABLE" under "Download Unsigned ActiveX Controls"
4) Are you sure you want to change the security levels for this zone? - Select YES. You can always revisit this section later on and reset it to Disable or Prompt. In order to view the webcam you need to select ENABLE in this section though.
5) Click on OK
You're nearly there....
6) You're now ready to download the ActiveX control and view the webcams. So...
|
|
View WebCam at 800 x 600
|
|
|
View WebCam at 1024 x 768
|
7) Select the viewing mode you wish to view at (1024 is the better option here) .. just click on one of the links above. The control panel window will open - you'll have a message at the top asking you if you want to download the ActiveX control - click YES or INSTALL - and wait a minute while it downloads.
 8) The log in window opens - the username is "canasta" the password is "canasta". After completing these fields click on the two computers side by side next to the log in area
At some stage you may get a message saying done but with errors...if so you should also have a message at the top of the viewing window that allows you to click on it to load the ActiveX control. You won't be able to load the webcams without downloading this control.
8) Have fun !!!
I havn't been able to test these instructions as I already downloaded the ActiveX control so PLEASE let me know if you have problems connecting !!
If all goes well you should get the control panel below..
 
I can even wave to you whilst you speak to me on the telephone!!!
195.93.21.7
38.103.63.60
74.6.8.126
78.150.145.28
78.32.70.172
82.41.142.136
86.20.25.141
90.195.193.114
| 
